Hoppa till innehåll
Free shipping over 5.552 SEK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%With a Steerable Camera Head, You See the Fault Before You Take the Machine ApartA Bore That Is Right at the Opening Can Be Wrong 400 mm Further InWhen the naked eye isn’t enough: measure and document the defect directly in the image instead of guessingMoisture is rarely where you can see it: how to tell whether wood, plasterboard and concrete are dry enoughThe cold room was too warm last night, but nobody knew when it startedThe Fuse Trips Once a Night: How to Find the Cause with a Logged Load CurveA core temperature reading in 0.4 seconds makes self-inspection a habit instead of an interruptionWhy Bore Measurements Show Different Values Depending on Who Holds the InstrumentThree Seconds at the Core: How to Make Temperature Control in Food Production Both Faster and SaferThe Brix value decides: get a reading in seconds instead of a guess by eyeVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%With a Steerable Camera Head, You See the Fault Before You Take the Machine ApartA Bore That Is Right at the Opening Can Be Wrong 400 mm Further InWhen the naked eye isn’t enough: measure and document the defect directly in the image instead of guessingMoisture is rarely where you can see it: how to tell whether wood, plasterboard and concrete are dry enoughThe cold room was too warm last night, but nobody knew when it startedThe Fuse Trips Once a Night: How to Find the Cause with a Logged Load CurveA core temperature reading in 0.4 seconds makes self-inspection a habit instead of an interruptionWhy Bore Measurements Show Different Values Depending on Who Holds the InstrumentThree Seconds at the Core: How to Make Temperature Control in Food Production Both Faster and SaferThe Brix value decides: get a reading in seconds instead of a guess by eye
Item number 64-907235

Measuring instrument with analog dial indicator for internal measurement, 50-160 mm

1.215 SEK

In stock

A precise measuring instrument for internal measurements in the range of 50-160 mm. This tool is perfect for accurate dimensional measurement in workshops and production environments. Ideal for quality control and technical precision work where exact internal measurements are required.

Request a quote 64-907235

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Free shipping over 3000 kr excl. VAT
  • Thermometers and measuring instruments for work and home
  • Call us +46 8 753 00 04

Category:

Description

Internal measuring instrument, measuring range 50 – 160 mm is a two-point internal hole inspection instrument from the ECONOMY LINE series — used for measuring the diameters of cylindrical holes and form deviations such as roundness and parallelism. The instrument is supplied with a measuring head and handle; the operator pairs it with a setting ring and a dial indicator (sold separately) to read hole deviation directly.

The two-point measuring principle uses two opposing contacts — one fixed reference, one spring-loaded probe — that ride against the hole wall. As the head is passed through the hole, diameter variations, ovality, taper, or ”barrelling” appear as dial indicator rotation at the handle.

Usage: select a setting ring at the nominal hole diameter; zero the dial indicator with the head seated in the ring; pass the head through the hole and note the dial indicator rotation at several positions. The deviation indicates ovality (one rotation at one position), taper (axial variation), and ”barrelling”.

Features

  • Two-point internal measuring instrument
  • Measuring range 50 – 160 mm
  • Two-point opposing contact measuring principle
  • Compatible with standard dial indicator (sold separately)
  • Setting ring zeroing
  • Hardened, ground measuring head
  • ECONOMY LINE build quality

Specifications

Type Two-point internal measuring instrument
Series ECONOMY LINE
Measuring range 50 – 160 mm
Measuring principle Two-point opposing contact, dial indicator reading
Material Hardened steel, dimensionally stable
Article number 64-907235

Compatible accessories

Dial indicator (matched to desired resolution — typically 0.001 or 0.01 mm) is required for use, sold separately. Setting rings within 50 – 160 mm for periodic zero verification. Calibration certificate (ISO 17025). Protective case. Spare measuring tips.

Additional information
Weight 1,087 kg
Specification

Internal measuring instrument, measuring range 50 – 160 mm is a two-point internal hole inspection instrument from the ECONOMY LINE series — used for measuring the diameters of cylindrical holes and form deviations such as roundness and parallelism. The instrument is supplied with a measuring head and handle; the operator pairs it with a setting ring and a dial indicator (sold separately) to read hole deviation directly.

The two-point measuring principle uses two opposing contacts — one fixed reference, one spring-loaded probe — that ride against the hole wall. As the head is passed through the hole, diameter variations, ovality, taper, or ”barrelling” appear as dial indicator rotation at the handle.

Usage: select a setting ring at the nominal hole diameter; zero the dial indicator with the head seated in the ring; pass the head through the hole and note the dial indicator rotation at several positions. The deviation indicates ovality (one rotation at one position), taper (axial variation), and ”barrelling”.

Features

  • Two-point internal measuring instrument
  • Measuring range 50 – 160 mm
  • Two-point opposing contact measuring principle
  • Compatible with standard dial indicator (sold separately)
  • Setting ring zeroing
  • Hardened, ground measuring head
  • ECONOMY LINE build quality

Specifications

Type Two-point internal measuring instrument
Series ECONOMY LINE
Measuring range 50 – 160 mm
Measuring principle Two-point opposing contact, dial indicator reading
Material Hardened steel, dimensionally stable
Article number 64-907235

Compatible accessories

Dial indicator (matched to desired resolution — typically 0.001 or 0.01 mm) is required for use, sold separately. Setting rings within 50 – 160 mm for periodic zero verification. Calibration certificate (ISO 17025). Protective case. Spare measuring tips.

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *