Published 18 November 2026 at 10:22
Monday morning, the cold room display reads 9 °C. Nobody knows whether it has been that way since Friday or whether the door was simply left open for a quarter of an hour during the goods delivery. Without logged history there is no way to tell, and the decision about the goods often ends up being to discard them to be safe. The same situation exists in warehouses with moisture-sensitive material, in server rooms and in measuring rooms where instruments must be kept in the right climate.
What it is
The TandD 56-TR-72NW is a temperature and relative humidity logger that connects directly to the network with a standard cable (10/100 Mbps, RJ45). It uploads the measured values by itself to T&D WebStorage in the cloud, or to an internal PC running T&D Data Server. The logger can be powered via PoE (IEEE 802.3af), so a single cable is enough. The included external probe 56-THA-3001 is on a cable and measures 0 to +55 °C and 10 to 95 %RH with an accuracy of ±0.5 °C and ±5 %RH at 25 °C and 50 %RH. The resolution is 0.1 °C and 1 %RH.
The problem it solves
Simple loggers require someone to go there, plug in a USB cable and retrieve the data. That usually happens only after something has already gone wrong. With a network connection, the values are collected in one place, and the history is available without anyone having to go out to the warehouse. The logger also has its own memory for 16,000 data points, so measurement continues even if the network is down for a while. At 10-minute intervals, that corresponds to just over three months of data. Configuration is done via USB (Mini-B), and 15 fixed logging intervals let you choose the rate that suits your needs.
Three use cases
Food production and warehouses. In cold rooms and warehouses above 0 °C, continuous logging provides documentation for self-inspection and audits. You can show that the temperature has been maintained, or see exactly when it was not. Note that the range starts at 0 °C, so the logger is not intended for freezer rooms.
Server rooms and technical spaces. The logger is already installed where the network is. A slow rise in temperature or air that is too dry shows up in the curve before it becomes an operational problem.
Measuring rooms and workshops. Micrometers, gauge blocks and vernier calipers are affected by temperature, and high humidity causes corrosion on hardened surfaces. A logger in the measuring room documents that conditions have been stable when a measurement needs to be defended.
Why it pays off
The savings lie mainly in what does not happen. You avoid manual reading rounds and handwritten lists, and you avoid discarding an entire batch because of uncertainty. With a long measurement series, you can instead show that the goods have stayed within the limits the whole time. Battery life is up to approximately one year at a 12-hour upload interval, and with PoE or an AC adapter it does not matter at all. The logger is small (58 × 78 × 26 mm) and can be placed wherever the measuring point is needed.
Do you need documented climate conditions without going around taking readings? Take a closer look at the logger and its specification.