Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%With a Steerable Camera Head, You See the Fault Before You Take the Machine ApartA Bore That Is Right at the Opening Can Be Wrong 400 mm Further InWhen the naked eye isn’t enough: measure and document the defect directly in the image instead of guessingMoisture is rarely where you can see it: how to tell whether wood, plasterboard and concrete are dry enoughThe cold room was too warm last night, but nobody knew when it startedThe Fuse Trips Once a Night: How to Find the Cause with a Logged Load CurveA core temperature reading in 0.4 seconds makes self-inspection a habit instead of an interruptionWhy Bore Measurements Show Different Values Depending on Who Holds the InstrumentThree Seconds at the Core: How to Make Temperature Control in Food Production Both Faster and SaferThe Brix value decides: get a reading in seconds instead of a guess by eyeVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%With a Steerable Camera Head, You See the Fault Before You Take the Machine ApartA Bore That Is Right at the Opening Can Be Wrong 400 mm Further InWhen the naked eye isn’t enough: measure and document the defect directly in the image instead of guessingMoisture is rarely where you can see it: how to tell whether wood, plasterboard and concrete are dry enoughThe cold room was too warm last night, but nobody knew when it startedThe Fuse Trips Once a Night: How to Find the Cause with a Logged Load CurveA core temperature reading in 0.4 seconds makes self-inspection a habit instead of an interruptionWhy Bore Measurements Show Different Values Depending on Who Holds the InstrumentThree Seconds at the Core: How to Make Temperature Control in Food Production Both Faster and SaferThe Brix value decides: get a reading in seconds instead of a guess by eye
Item number 64-907230

Measuring instrument with analog dial indicator for internal measurement, 6-10 mm

1.379 SEK

In stock

Precision instrument for accurate internal measurement within the 6-10 mm range. Perfect for the workshop industry, quality control, and precision work where exact internal dimensions are required. Manufactured with high quality for long-lasting durability and reliable measurement results.

Request a quote 64-907230

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

  • Free shipping over 3000 kr excl. VAT
  • Thermometers and measuring instruments for work and home
  • Call us +46 8 753 00 04

Category:

Description

Internal measuring instrument, measuring range 6 – 10 mm is a two-point internal hole inspection instrument from the ECONOMY LINE series — used for measuring the diameters of cylindrical holes and form deviations such as roundness and parallelism. The instrument is supplied with a measuring head and handle; the operator pairs it with a setting ring and a dial indicator (sold separately) to read hole deviations directly.

The two-point measuring principle uses two opposing contacts — a fixed reference and a spring-loaded probe — that ride against the hole wall. As the head is passed through the hole, diameter variations, ovality, taper, or ”barrelling” appear as dial indicator rotation at the handle.

Usage: select a setting ring at the nominal hole diameter; zero the dial indicator with the head seated in the ring; pass the head through the hole and note the dial indicator rotation at several positions. The deviation indicates ovality (one rotation at one position), taper (axial variation), and ”barrelling”.

Features

  • Two-point internal measuring instrument
  • Measuring range 6 – 10 mm
  • Two-point opposing contact measuring principle
  • Compatible with standard dial indicator (sold separately)
  • Setting ring zeroing
  • Hardened, ground measuring head
  • ECONOMY LINE build quality

Specifications

Type Two-point internal measuring instrument
Series ECONOMY LINE
Measuring range 6 – 10 mm
Measuring principle Two-point opposing contact, dial indicator reading
Material Hardened steel, dimensionally stable
Article number 64-907230

Compatible accessories

A dial indicator (matched to desired resolution — typically 0.001 or 0.01 mm) is required for use, sold separately. Setting rings within 6 – 10 mm for periodic zero verification. Calibration certificate (ISO 17025). Protective case. Spare measuring tips.

Additional information
Weight 0,421 kg
Specification

Internal measuring instrument, measuring range 6 – 10 mm is a two-point internal hole inspection instrument from the ECONOMY LINE series — used for measuring the diameters of cylindrical holes and form deviations such as roundness and parallelism. The instrument is supplied with a measuring head and handle; the operator pairs it with a setting ring and a dial indicator (sold separately) to read hole deviations directly.

The two-point measuring principle uses two opposing contacts — a fixed reference and a spring-loaded probe — that ride against the hole wall. As the head is passed through the hole, diameter variations, ovality, taper, or ”barrelling” appear as dial indicator rotation at the handle.

Usage: select a setting ring at the nominal hole diameter; zero the dial indicator with the head seated in the ring; pass the head through the hole and note the dial indicator rotation at several positions. The deviation indicates ovality (one rotation at one position), taper (axial variation), and ”barrelling”.

Features

  • Two-point internal measuring instrument
  • Measuring range 6 – 10 mm
  • Two-point opposing contact measuring principle
  • Compatible with standard dial indicator (sold separately)
  • Setting ring zeroing
  • Hardened, ground measuring head
  • ECONOMY LINE build quality

Specifications

Type Two-point internal measuring instrument
Series ECONOMY LINE
Measuring range 6 – 10 mm
Measuring principle Two-point opposing contact, dial indicator reading
Material Hardened steel, dimensionally stable
Article number 64-907230

Compatible accessories

A dial indicator (matched to desired resolution — typically 0.001 or 0.01 mm) is required for use, sold separately. Setting rings within 6 – 10 mm for periodic zero verification. Calibration certificate (ISO 17025). Protective case. Spare measuring tips.

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *