Published 2 July 2026 at 16:22
For those working with pharmaceutical logistics, cold chain documentation is not an administrative formality — it is the product. A vaccine that cannot be proven to have been stored between +2 and +8 °C throughout the entire distribution chain is a vaccine that, legally, does not exist. The GDP (Good Distribution Practice) guidelines from the Swedish Medical Products Agency (Läkemedelsverket) and the European Commission’s corresponding directives are clear: temperature must be monitored continuously, documentation must be traceable, and deviations must trigger alarms in real time. What is often misunderstood is that the requirement does not apply to the air temperature inside the refrigerator — it applies to the product’s temperature.
Why the air sensor gives the wrong answer
A medical refrigerator has a built-in temperature sensor in the airflow. This sensor measures the air temperature, which fluctuates rapidly: when the door is opened to retrieve a vial, the air quickly rises to near room temperature; when the door is closed, the refrigerator rapidly returns to its set temperature. Seemingly, nothing happened. A brief spike may appear on the display, but the average value indicates normal operation.
The vaccine in the vial has an entirely different thermal inertia. The liquid warms up slowly when exposed and cools down slowly once the door is shut. A vaccine that is theoretically exposed to 22 °C for 30 seconds may in practice have only risen from +4 °C to +5.2 °C, as the liquid did not have enough time to warm up further during that brief interval. It is this product-simulated temperature that is clinically relevant, not the air temperature.
What the glycol bottle does
The ETI ThermaGuard Pharm 102 solves this through a simple yet ingenious design. Each of the two probes is enclosed in a sealed bottle filled with propylene glycol solution (50 ml included). The glycol liquid has a thermal inertia similar to that of a vaccine — it warms up and cools down at the same rate as the medication vial standing next to it. When you measure the temperature of the glycol bottle, you are measuring what the vaccine was actually exposed to, not what the air momentarily indicated.
It is this sensing principle that distinguishes the Pharm model from standard digital thermometers with external probes. A standard probe is a thin metal sensor that reacts instantly to air — it registers every single door opening, triggers an alarm for every rapid air fluctuation, and generates documentation riddled with ”false” excursion warnings. Glycol-simulated measurement provides clinically relevant monitoring.
What the ThermaGuard Pharm 102 includes
The 102 model features two external remote probes, both waterproof with a 2-meter PVC lead — this is the variant used for dual applications. One probe can be placed in the primary refrigerator and the other in a backup unit or a transport vehicle. The alarm triggers when either probe exceeds the programmed high or low threshold.
The alternative 101 model features one remote probe + one internal sensor — ideal when you want to simultaneously monitor product temperature and ambient temperature, such as the room temperature where the refrigerator is located.
CalCheck function: The instrument features a built-in function to verify its own accuracy at 0.0 °C (±0.1 °C). This is critical for GDP compliance: you can verify before each use that the probe remains accurate — without having to send the instrument away for external calibration. An optional two-point UKAS calibration certificate is available, with documented deviations at -18 °C and 0 °C.
Programmable alarms: Both high and low limits are adjustable. The alarm features an audible alert plus a flashing display and can be silenced with the press of any button — standard procedure is to acknowledge the alarm, document the excursion, and take corrective action.
IP54 housing: Splash-proof for use in environments where spray cleaning is routine — pharmacies, hospitals, and laboratories.
EN 13485: Complies with the European standard for thermometers intended for pharmaceutical and food refrigeration.
Where the instrument is used in practice
Pharmacies: The Swedish Medical Products Agency mandates documented temperature monitoring of vaccines and other temperature-sensitive pharmaceuticals. Product-simulated measurement using a glycol bottle delivers clinically relevant readings instead of nuisance air alarms.
Health centres and vaccination clinics: Every vaccine batch must be traceable with an accurate temperature history. If a batch must be discarded, documentation is the only way to justify this legally.
Hospital pharmacies: Blood components, thermolabile pharmaceuticals, biological products — all have strict refrigeration requirements. GDP inspections by regulatory authorities require continuous, traceable documentation.
Pharmaceutical distribution: Transporting vaccines between wholesalers and pharmacies must be documented in accordance with GDP. A ThermaGuard in each transport container is a straightforward solution for smaller distribution chains.
Vaccine logistics in disaster relief and field medicine: During outdoor deployments and large-scale vaccination campaigns (e.g. during pandemics), product-simulated temperature measurement is often the only way to prove that the cold chain was maintained.
Clinical trials: Study samples that must be kept chilled for subsequent analysis require temperature traceability — a simple glycol-buffered monitoring setup complements the more expensive continuous wireless loggers often required by study protocols.
Value for money
Compared to the value of a single vaccine dose, 1,560 SEK is a negligible investment. A single discarded batch of influenza vaccines (200–500 doses) costs 15,000–40,000 SEK, not to mention the clinical consequences for patients if a vaccine batch is later suspected of having suffered a temperature excursion. The instrument is designed to make correct documentation practically achievable — and that is precisely where GDP compliance often succeeds or fails.
Read more: ETI ThermaGuard Pharm 102 vaccine thermometer in the store →