Hoppa till innehåll
Free shipping over 3000 kr excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%A core temperature reading in 0.4 seconds makes self-inspection a habit instead of an interruptionWhy Bore Measurements Show Different Values Depending on Who Holds the InstrumentThree Seconds at the Core: How to Make Temperature Control in Food Production Both Faster and SaferThe Brix value decides: get a reading in seconds instead of a guess by eyeThree seconds is enough to tell whether the core temperature holdsTwo-point measurement in an oval hole gives the wrong diameter, three measuring points do notHow to tell in three seconds whether a hole meets the H7 toleranceThe Hole Measures Right in One Direction but Is Still Wrong: Why You Need Three Measuring PointsWhy the Multimeter Shows the Wrong Voltage on a Variable Frequency Drive and How True RMS Fixes ItMotion blur hides the defect: how strobe lighting freezes a fast-moving detail in the microscope imageVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%A core temperature reading in 0.4 seconds makes self-inspection a habit instead of an interruptionWhy Bore Measurements Show Different Values Depending on Who Holds the InstrumentThree Seconds at the Core: How to Make Temperature Control in Food Production Both Faster and SaferThe Brix value decides: get a reading in seconds instead of a guess by eyeThree seconds is enough to tell whether the core temperature holdsTwo-point measurement in an oval hole gives the wrong diameter, three measuring points do notHow to tell in three seconds whether a hole meets the H7 toleranceThe Hole Measures Right in One Direction but Is Still Wrong: Why You Need Three Measuring PointsWhy the Multimeter Shows the Wrong Voltage on a Variable Frequency Drive and How True RMS Fixes ItMotion blur hides the defect: how strobe lighting freezes a fast-moving detail in the microscope image

How to Measure pH in Wells & Pools

Published July 2, 2020 at 07:25

To measure pH, you need a pH indicator or, even better, a pH meter. What is a pH value and why do we measure pH? The pH value is a measure of the acidity of a solution. Acidity is in turn determined by the hydrogen ion concentration. pH is expressed on a so-called logarithmic scale, meaning the difference between, for example, pH 3 and pH 4 is that the hydrogen ion concentration is 10 times higher at pH 3.

Some examples of pH values:

  • Battery acid ~ pH 0
  • Stomach acid ~ pH 1
  • Orange juice ~ pH 4
  • Distilled water ~ pH 7
  • Washing soda ~ pH 13

The pH value is also affected by the temperature of the solution. You should always use a pH meter with built-in temperature compensation. All of this combined makes pH measurements significantly more complicated than, for example, temperature measurements.

Because pH sensors have low repeatability—meaning that for a given pH concentration they will display different values over time—a pH measurement MUST ALWAYS be preceded by calibration. This is done by first soaking the pH sensor for a number of hours, preferably in standard tap water, before calibrating. A distinction is made between 1-, 2-, and 3-point calibrations. We do not recommend 1-point calibrations, as the linearity (read: accuracy) will be inadequate.

Calibrating a pH meter is done as follows: prepare reference buffer solutions, pH 4.00, pH 7.00, and pH 10.00. You should also have a beaker of distilled (deionized) water to rinse the pH sensor with before moving to the next buffer solution. Pour a few cl of each buffer into 3 separate glasses. Then follow the instructions on the pH meter’s display and immerse the pH sensor into each solution in sequence. Check that the calibration is accepted—it should say ”OK” on the display after each step.

More news

All news